TempLog - New product!

The TempLog is a GSM-based log for use with temperature sensors and voltage output sensors. The unit's log interval can be adjusted and the logged data is automatically read by the accompanying PC software, once the unit starts to reach its full memory capacity.

- Broad voltage range 9-28V AC/DC
- 8 temperature sensor inputs
- 3 analogue inputs 0-10V
- 3 alarm inputs which generate text message alarms when triggered
- 2 relay utputs, activated via SMS
- Broad area of use
- Simple operation
- All settings are configured remotely using the accompanying PC programme

Download product sheet PDF here (soon to come)

The TempLog is easy to install and very simple to use.

The unit continously logs data from the connected sensors and saves them to a log file. The log file is automatically downloaded when the unit's memory is running out.

Approx. 3 000 log entries can be stored in the unit's memory, the log interval time is adjustable to a minimum of 5 seconds.

The data is saved as a semicolon-separated log file which can be opened using various different programmes, e.g. Excel.

The PC programme TempLog Service System is capable of administering numerous different TempLog units. The programme automatically downloads, according to a designated interval, the log files and saves them in a system of folders for further processing.
The software can also be used to configure all settings and remotely control all of the unit's functions.

Temperature sensors:

The unit is equipped with 8 temperature sensor inputs. The sensors are digital, with a temperature range from -40oC to +120oC.
The sensors can be delivered with up to 15 meters of cable.

Analogue inputs:

The TempLog has 3 analogue inputs 0-10V, with a 10-bit resolution.

Alarm inputs:

The unit has 3 alarm inputs which when triggered can generate text message alarms to the user-defined recipients.
If an alarm is sent to the PC with the TempLog administration software, it can be set to automatically download the log files.

Outputs:

Connected equipment can be remotely controlled by the unit's 2 relay outputs. The outputs are activated via SMS commands.
The relay can handle loads of 1A @ 24V.

Please contact ComLink for further information.